carbon fat bike rim material environment -Ekay Original article

2016-04-25

　Relationship between the carbon fiber and the environment
Carbon fiber-containing resin and therefore it can be said acid. However, carbon fibers, should give more consideration to internal factors, it is therefore the possibility of resin with a resin aging exists. Should avoid sunlight, and sunlight affect the temperature of the environment to its maximum carbon fibers bike is not used.

Relationship between titanium and the environment
Excellent corrosion resistance (used in atomic energy and related sectors), not afraid of rain, afraid of injuries, stained with water droplets do not wipe clean. Bicycle prepared using this material is a waste, but there are disadvantages as previously titanium (corrosion of dissimilar metals), such as aluminum and titanium parts are joined together when the parts are gradually etched.

In addition to titanium, other metals can also occur between dissimilar metal corrosion, especially in parts of the seat tube, for example, the seat tube and aluminum chromium molybdenum steel frame joined together regardless of when the contact surface turns brown, and even Unable to extricate them down.

Metal fatigue
Metal fatigue
Production of the bicycle frame material chromium molybdenum steel, aluminum, titanium, carbon fiber and the like. Which used to produce the thinnest tube is chrome-molybdenum steel frame. Its workability is good, cheap materials, Riding feeling good, but it must be made of thin-walled tubes, thin-walled tube there is such a high tensile strength and workability.

Strength chrome-molybdenum steel is easier to gradually weaken, which is easier to fatigue phenomena seen in the following.
(1) The same impact force applied to a variety of materials, the maximum stress (prone to damage caused by fatigue) chromium molybdenum steel thin tube occurred.

(2) a long history of research on chromium-molybdenum steel, the maximum limit use of its features made extremely thin-walled tubes, each local site, although stress occurs, but for the entire tube is higher stress will occur .

(3) Comprehensive corrosion caused by the rust will cause changes in the pipe wall, the result of this phenomenon and increase the stress caused by fatigue damage.

(4). In the local stress concentration and rust, or recess caused by trauma, causing fatigue failure from there.

(5) The shock generated when the race to make the frame a high stress occurs, the more the frequency of use of fatigue damage is gradually increasing.

Above is mainly for chromium-molybdenum steel, aluminum alloy frame but the rapid development, there are many thin-walled aluminum tube frame production, whether they are above-chromium-molybdenum steel frame, like fatigue damage it? Especially aluminum no fatigue limit, minimal stress is bound to cause damage. The greater the damage to the
stress, the shorter the time required. Extremely thin-walled aluminum frame tubes sold, none of the manufacturers clearly indicate its life.

Précédent :carbon fat bike wheels developed -Ekay Original article

Prochaine :what type of material is carbon fat bike made up of? -Ekay Original article